Description
Featuring a plywood cabinet that delivers a clear sound with minimal vibration.
Plywood enclosure with a polyurea coating for a robust, scratch resistant surface.
Compact size despite the 15-inch LF driver that provides excellent low frequency response.
Dual-angle pole sockets offer both 0° or a -7° down tilt.
Rigging points for use with eye bolts.
Propitiatory FIR-Xž tuning, provides FIR filtering and corrective EQ, minimizing phase distortion.
Performance. Optimized
The DHR and CHR Series are ideal solutions for anyone ready to step up their sound reinforcement game to a new level of professional quality, accuracy, and performance. Premium plywood cabinets finished in a tough polyurea coating provide durability not found on other loudspeakers in this class. Each model has been optimized to meet the demands of a variety of sound reinforcement applications.
| DHR15 | ||
|---|---|---|
| Frequency range (-10dB) | 44 Hz – 20 kHz | |
| Coverage area | H90ﾟ x V60ﾟ | |
| Crossover | 1.8 kHz: FIR-X tuningâ„¢ (linear phase FIR filter) | |
| Maximum Output Level (Measured peak, IEC noise@1m) | 131 dB SPL | |
| Components | LF | Diameter: 15" cone, Voice Coil: 2.5", Magnet: Ferrite |
| HF | Diaphragm: 1.4", Type: 1" throat compression driver, Magnet: Ferrite | |
| Amplifier class | Class-D | |
| Power rating | Dynamic | 1,000 W (LF: 800 W, HF: 200 W) *1 |
| Continuous | 465 W (LF: 400 W, HF: 65 W) | |
| Cooling | Fan cooling, 4 speeds | |
| Power consumption | 74 W (1/8power), 18 W (Idle) | |
| Power requirements | 100 V, 100-120 V, 220-240 V, 110/127/220 V (Brazil), 50/60 Hz | |
| A/D D/A Converters | 24 bit 48 kHz Sampling | |
| Processors | HPF: OFF, 100 Hz, 120 Hz, 24 dB/Oct.; D-CONTOUR: FOH/MAIN, MONITOR, OFF | |
| I/O connectors | INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix) | |
| Cabinet material | Plywood | |
| Finish | Durable Polyurea Painting, Black | |
| Handle | Side x2 | |
| Pole socket | Φ35 mm x2 (Bottom, 0° or -7°) | |
| Rigging | Top x 2, Rear x 1 (Fit for M10 x 30 – 50 mm Eyebolts) | |
| Floor Monitor Angle | – | |
| Dimensions | W | 432 mm (17.0") |
| H | 692 mm (27.2") (with rubber feet) | |
| D | 405 mm (15.9") | |
| Net weight | 24.0 kg (52.9 lbs) | |
There are no reviews yet.